| Author | Topic |
|---|
Location:
Melbourne
Registered:
June 2004
|
|
Simmons 16s 4x114.3 $450
|
Sun, 30 January 2005 10:58
|
 |
Set of 4 Simmons wheels
Front: 16x8
Back: 16x9
Just powdercoated in White and unused since restoration.
No center caps, but these are real simmons.
4x114.3 stud patern.
These were on a mid 80s mazda 929, so I'm told now, I was originally told they were off a 70s mazda 929, and I got them home and they didn't fit my RX4  
So they are the right stud pattern for lots of Toyotas, but not the correct offset. could be worth sourcing used inner and outer rims, or simpley reversing the ones there. You might be able to work something out for a Toyota.
Tyres are pretty good, and are all 225s
!!!IMPORTANT!!!
After they got back from restoration I noticed a crack on one of the wheels Sad so that's why they are so cheap. the crack is across the center of one of the back wheels. It's not in a load point, and I figured out that it's been caused by forcing the wheel over a hub that was too big, because of the marks on the back. I was not worried about it and was happy to run it on the back, but it's up to you. There is a pice of the crack for you to check out.
Price: $450 (not bad considering the tyres are pretty good)
Location: Melbourne, SE Suburbs
Prefer local buyer.
http://www.codger.live.com.au/simmons1.jpg
http://www.codger.live.com.au/simmons2.jpg
http://www.codger.live.com.au/simmons3.jpg
http://www.codger.live.com.au/Crack1.jpg
http://www.codger.live.com.au/Crack2.jpg
http://www.codger.live.com.au/Crack3.jpg
http://www.codger.live.com.au/Crack4.jpg
http://www.codger.live.com.au/Crack5.jpg
[Updated on: Sun, 30 January 2005 11:01]
|
|
|
| | Subject | Poster | Date |
|---|
 |
Simmons 16s 4x114.3 $450
|
Wolf3D | Sun, 30 January 2005 10:58 |
|
Re: Simmons 16s 4x114.3 $450
|
openvtec | Sun, 30 January 2005 11:30 |
