Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » 4AGZE SC14

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
foxtail
Regular


Location:
Brisbane
Registered:
January 2005
4AGZE SC14 Wed, 09 February 2005 10:24 Go to previous message
I now have my frankensprinter on the road.

The engine is a 4AGZE. Intake manifold is 100kw reversed for RWD.

The SC14 bottom mount is a SC12 mount, but and welded 10mm forward.

The water pump and altinator is 4AFE with small spacers, to run off the front pulley to under drive them as I plan on a bigger crank pulley.

The intercooler is factory 1JZ and the air comes out at ambient.

The SC tensioner was cut and welded up side down to avoid the water pump.

The ecu is Aussie AE82 big port NA, with 3SGTE map sensor - good to 16psi.

Mixtures are slightly rich, not sure exactally, advance has been retarded a couple of degrees.

60mm alloy pipe and mandrel copper plumbing bends ($8 ea) throughout.

Boost 12psi Estimated ET 14.2, estimated HP 200, seams as fast as my old stock ze with 175 nevo pulley but noticable increase in power as revs rise. Sat next to riced S15, realed in RX8.

I will run a constant pressure system, with throttle body after blower and BOV to regulate boost to make it more drivable. Large intercoolers on SCs give decel rev rise as they suck the air out of the cooler. Putting the TPS on the front throttle body (CA18 backwards) should stop this.

First gear traction and launch is an issue.

http://www.users.tpg.com.au/foxtail/pics/100_0097. jpg


http://www.users.tpg.com.au/foxtail/pics/index.jpg for filenames, feel free to leach site.


  Send a private message to this user    

SubjectPosterDate
Read Message   4AGZE SC14  foxtailWed, 09 February 2005 10:24
Read Message   Re: 4AGZE SC14 Rex_KelwayWed, 09 February 2005 13:31
Read Message   Re: 4AGZE SC14 MR 1JZThu, 10 February 2005 00:04
Read Message   Re: 4AGZE SC14 foxtailThu, 10 February 2005 11:08
Read Message   Re: 4AGZE SC14 questThu, 10 February 2005 17:47
Read Message   Re: 4AGZE SC14 foxtailThu, 10 February 2005 20:55
Read Message   Re: 4AGZE SC14 ClownThu, 17 March 2005 09:50
Read Message   Re: 4AGZE SC14 toofThu, 17 March 2005 10:30
Read Message   Re: 4AGZE SC14 4agteThu, 17 March 2005 11:46
Read Message   Re: 4AGZE SC14 BenjaminThu, 17 March 2005 11:51
Read Message   Re: 4AGZE SC14 AlchemistThu, 17 March 2005 12:12
Read Message   Re: 4AGZE SC14 DRFT - 86Mon, 23 May 2005 06:55
Read Message   Re: 4AGZE SC14 oldcorollasMon, 23 May 2005 11:51
Previous Topic:AE111 front suspension
Next Topic:7A oil pump into 4AGE bottom end....

Goto Forum:
-=] Back to Top [=-

Current Time: Tue Feb 4 22:44:50 UTC 2025

Total time taken to generate the page: 0.0105299949646 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.