F.A.Q.    Register    Login    Home Members    Search

Classifieds » Parts Wanted » 5M-GE distributor Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ScottM Occasional Poster Location: Hobart Registered: October 2004	5M-GE distributor Tue, 22 February 2005 03:07 Heya again guys, I'm after a couple more small bits - A distributor for a 5M-GE, vaccuum advance. I have a 5M distributor. So either the short shaft, replacement distributor, or the engineering drawings to have the original modified. - The TPS is 3 wire on the 5M loom, 4 on the 5M-GE. I understand you can use just 3 wires of the TPS, provided it's an early model 5M-GE. Alternatively, anyone with a 3 (or 4) connector TPS that'll work? (I suspect this may be a later model engine - apparently the distributor that would have fit is a autronic model). - The air pipe from the box to the engine is a slightly different length for the two engines. Does anyone know of a hose or replacement that drops in? Thanks all! Scott. [Report message to a moderator]

	Subject	Poster	Date
	5M-GE distributor	ScottM	Tue, 22 February 2005 03:07
	Re: 5M-GE distributor	SUPRA MAN	Tue, 22 February 2005 13:28
	Re: 5M-GE distributor	ScottM	Thu, 24 February 2005 07:37
	Re: 5M-GE distributor	cambelt	Fri, 25 February 2005 12:17
	Re: 5M-GE distributor	Cool1	Fri, 25 February 2005 12:21
	Re: 5M-GE distributor	thetoyman75	Sat, 26 February 2005 06:45
	Re: 5M-GE distributor	wil8115	Sat, 26 February 2005 09:55
	Re: 5M-GE distributor	ScottM	Sun, 27 February 2005 05:00
	Re: 5M-GE distributor	wil8115	Sat, 19 March 2005 01:00

Previous Topic:	4AGE Throttle Body
Next Topic:	WTB: Idling screw for 22RE (RA65 Celica)

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.