Location: Perth Western Australia
Registered: April 2004
NEED HELP ASAP ! re: Parklights
Sat, 26 February 2005 09:42
Hey all ... just wiring up my foglights on my celica
now ive installed everything but the switch to turn them on coz im stuck on somehing...
here is the wiring diagram .. all is install apart from the switch
ive grounded it ... the white wire is attached .. now in that diagram it says "(RED) Connect wire to + Side of Parking light"
to the right of the wiring diagram ... does this mean i have to find which wire my lights are hooked to and attach it .. does anyone know which wire or how to find the wire. ?
if i didnt hook the wire up (red one coming from switch) then do u think the lights will still work ???
Location: Perth Western Australia
Registered: April 2004
Re: NEED HELP ASAP ! re: Parklights
Sat, 26 February 2005 10:01
UPDATE !!
its been 10 mins and ive wondered if i can actually splice the wire at the ACTUAL PARK LIGHT .. that is .. behind the globe enclosure splice the + wire and just solder it to that ?
Location: Bottom of the hill, Sydney
Registered: April 2004
Re: NEED HELP ASAP ! re: Parklights
Sat, 26 February 2005 10:11
Could those pics be any bigger .
Where is the relay mounted?
If it is in the engine bay just pic up of one of the park light wires.
If it is inside the cab then pic up off the headlight switch.
You need to connect the red wire to a wire on your car that has power when the park lights are turned on.
Location: Perth Western Australia
Registered: April 2004
Re: NEED HELP ASAP ! re: Parklights
Sat, 26 February 2005 10:24
as per my 2nd post .. with the wires coming from the rear of the actaul park light globe enclosure .. (where u instert the globe for the park light would it be the
a.) White wire with black stripe
or
b.) Green wire
looks like the Green is leading to the BOTTOM of the globe inserted and the white/black wire is going to the side..
anyone know if its just generic that globes are + on the bottom and - on the side ?
oh and if stripped one of those wires and ran it to that because the switch's red wire is in the engine bay not under the dash u think thats smart or tarded ?