| Author | Topic |
|---|
Location:
Brisbane
Registered:
June 2002
|
|
34 ADM Weber, flooding from return line
|
Mon, 28 February 2005 08:15
|
 |
ok, well....i had this problem when i first installed the Weber, the fuel was literally running through the carby and into the head. The fuel bowl was overfilling and it was just running over. I have since installed a 1-way valve type arrangement but it needs quite a bit of pressure to open, and i think this is putting my fuel pressure through the roof. I have a spare fuel pressure regulator from a Holley blue, and would like to know, if i replace my 1-way valve with this, will it stop fuel from coming down the return line?
this is all in a ta22, std 2t motor, with a 34 ADM weber, elec fuel pump. the fuel pump is mounted in the engine bay, then routes to carb inlet. the carb return routes to the 1 way valve, then back to the tank
any help will be appreciated 
[Updated on: Mon, 28 February 2005 08:47]
|
|
|
| | Subject | Poster | Date |
|---|
 |
34 ADM Weber, flooding from return line
|
Jezza | Mon, 28 February 2005 08:15 |
|
Re: 34 ADM Weber, flooding from return line
|
oldcorollas | Mon, 28 February 2005 10:03 |
|
Re: 34 ADM Weber, flooding from return line
|
Jezza | Mon, 28 February 2005 10:10 |
|
Re: 34 ADM Weber, flooding from return line
|
oldcorollas | Mon, 28 February 2005 10:26 |
|
Re: 34 ADM Weber, flooding from return line
|
Jezza | Mon, 28 February 2005 10:38 |
|
Re: 34 ADM Weber, flooding from return line
|
oldcorollas | Mon, 28 February 2005 11:05 |
|
Re: 34 ADM Weber, flooding from return line
|
Jezza | Mon, 28 February 2005 11:09 |
