| Author | Topic |
|---|
On Probation
Location:
nsw
Registered:
March 2004
|
|
RA23 Suspension
|
Sat, 12 March 2005 12:26
|
 |
Im looking for sugestions in regards to a setup mainly shocks and springs ive budgeted around a grand  I basicaly want to go as low as I can and still have it handle 
|
|
|
Location:
Brisbane
Registered:
May 2002
|
|
Re: RA23 Suspension
|
Sat, 12 March 2005 14:54
|
|
A grand won't get you very far... I'd spend more than that on shocks alone. There's no point doing a half-arsed job with suspension, either do it properly or don't bother at all.
I'm using Fulcrum springs in my RA23, they're about 3" lower than stock and I wouldn't go any further than that if you want it to handle and be driveable on the street.
|
|
|
Registered:
November 2002
|
|
Re: RA23 Suspension
|
Sun, 13 March 2005 00:22
|
|
What Norbie said.
A grand will get you a Pedders/Monroe set-up, not good.
I spent about $1400 and got Koni sport adjustables all round, Lovells heavy duty lowered springs, adj. panhard rod, and new Red Ranger polyurethane bushes through-out the entire car. Also had fitted a TT142 24mm front sway bar, which is about to be replaced with a RA40GT item.
Search and Read these forums, there is plenty of info on this subject.
|
|
|
