| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Megasquirt 2 :)
|
Mon, 14 March 2005 04:54
|
 |
hey all,
should be installing MS2 for ignition control later this week.
system is.
brand new toyota 4K elec dizzy, locked by removing weights.
AE82 bosch VR igniter, with a 470ohm pull-up resistor from 12V on the output, going to the MS/MS2 tach input (no Dave Cap, no John Zener).
output of MS2 goes to Jaycar HEI set up with "Hall Effect sensor" input, BUT with the 820ohm pull-up resistor removed.
the MS2 output is "Going High (inverted)" since the HEI triggers on the rising edge.
this all results in the HEI trigger exactly on the VR's zero-crossing point when all offsets and advance are set to 0.
wiring and instal later this week 
oh and need to work out the 12x12 tables.. i think i'll be grouping them around idle 
Cya, Stewart
|
|
|
