| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
 Dellow JZ -> W5X Alloy bellhousing
|
Wed, 23 March 2005 12:54
|
 |
I have a dellow JZ -> W5X Alloy bellhousing (unfortunately...) 
The bellhousing can be set up to have the slave on either the divers or passenger side, I wish the slave to be on the passenger side. Currently the slave is on the drivers side...my question is will removing the alloy from the other side (such that the slave can be mounted on either side) weaken the bellhousing too much (i suspect it would be fine)...also if someone has a pic of a dellow bellhousing with the slave on the passenger side I would appreciate it (or even better the measurement for the location of the hole for the pivot point, in the case that it isn't directly mirrored).
The next question is can somebody identify this slave cylinder (an email is also heading dellows way as I suspect it was part of the dellow kit), and is there one that will suit the relocation of the slave to the passenger side. Does anyone know what slave dellow supply to mount the fork on the passenger side (and is the cylinder sizing sutiable to be used with the stock ma61 clutch master?)? I'm guessing the easiest thing to do is mount a toyota one on the passenger side...
And one last thing 
I found the clutch fork to look a little strange....the marks on it seem to be consistent with one thing...putting the throwout bearing in the wrong way! Gee must have been noisy! ps it wasn't me, it came to me this way. (also anyone got dellows part number for this?,and *shudder* a cost...)
Cheeers
Wilbo
|
|
|
| | Subject | Poster | Date |
|---|
 |
Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Wed, 23 March 2005 12:54 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Wed, 23 March 2005 13:50 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Wed, 23 March 2005 14:09 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Wed, 23 March 2005 22:51 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
81LOWLUX | Wed, 23 March 2005 23:07 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Skip | Wed, 23 March 2005 23:51 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
Allan | Thu, 24 March 2005 00:28 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Thu, 24 March 2005 00:52 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Thu, 24 March 2005 00:59 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Thu, 24 March 2005 01:23 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
BlackSupra | Thu, 24 March 2005 05:50 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
mrshin | Thu, 24 March 2005 14:19 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Fri, 25 March 2005 00:34 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
gianttomato | Fri, 25 March 2005 00:59 |
|
Re: Dellow JZ -> W5X Alloy bellhousing
|
wilbo666 | Fri, 25 March 2005 03:06 |
