Author | Topic |
Location: Adelaide
Registered: September 2003
|
small pipe thing in between 18r bore
|
Sun, 10 April 2005 06:25
|
 |
does anyone know what the small pipey thing is in between the cylinder bores of 1 and 2 and also 3 and 4?
if you take the welsh plugs out you can see them they come out at about the halfway point and then turn right angles and point upwards towards the top of the block.
they are no more than 5mm in diameter and from the bore it comes about 2-3cm out and then 4-5 cm upwards.
it is on both sides of the block.
i don't have a camera so can't take a picture but i was hoping somebody knows what i am talking about.
|
|
|