| Author | Topic |
|---|
Location:
ADELAIDE
Registered:
March 2005
|
|
webber carbys
|
Sun, 10 April 2005 06:15
|
 |
just would some tell if a TE cortina webber carby i got from a friend can fit onto my 4k manifold or if would would be any other carbie that would fit
any help
cheers
|
|
|
Location:
Sydney
Registered:
November 2003
|
|
Re: webber carbys
|
Sun, 10 April 2005 08:01
|
|
|
alfa 33 carbies bit apparently, or u could use a datto 180b one but ud prolly be best of getting it rejetted.
|
|
|
Location:
ADELAIDE
Registered:
March 2005
|
|
Re: webber carbys
|
Mon, 11 April 2005 11:35
|
|
well got this carbie so hopeing ican fit it to my 4k ,it seems to be a dgv 32/34 or what ever is that to big, will it be a big improvement over the current stock carby
|
|
|
Location:
Adelaide
Registered:
July 2004
|
|
Re: webber carbys
|
Mon, 11 April 2005 11:40
|
|
|
they are an improvement, might need to rejett it depending on the mods. Redline make an adapter to suit.
|
|
|
Location:
ADELAIDE
Registered:
March 2005
|
|
Re: webber carbys
|
Mon, 11 April 2005 12:40
|
|
well not sure on the size to be honest  it has 27 and 26 on the housings so it mught right size , my engine is pretty stock exept headers and exhust
|
|
|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: webber carbys
|
Mon, 11 April 2005 13:18
|
|
you want a primary choke around 22-24mm to have good low throttle driveability.
26mm is too big.
|
|
|
Location:
ADELAIDE
Registered:
March 2005
|
|
Re: webber carbys
|
Mon, 11 April 2005 21:32
|
|
|
so this webber from a TE cortina would no good then or would need to modify the carbie more
|
|
|
Location:
Melbourne
Registered:
January 2005
|
|
Re: webber carbys
|
Mon, 11 April 2005 23:14
|
|
|
So wat carby from another car will bolt strate in n make a good improvement????
|
|
|
Location:
ADELAIDE
Registered:
March 2005
|
|
Re: webber carbys
|
Tue, 12 April 2005 09:01
|
|
like said i got this webber from a cortina want to know if it would bolt straight in and would it improve my engine power, or would need a adapter, or has any one fitted said carby to a k series engine , cos this carby was recommended on this site
http://superjamie.net/oldcorollas/
|
|
|
Location:
Adelaide
Registered:
February 2005
|
|
Re: webber carbys
|
Tue, 12 April 2005 10:06
|
|
32/34 or 32/36 downdraught weber will not bolt on, need adapter plate, redline make one but they are pretty shitty, well i got one for my dato 1600 (same adapter) and they dont fit that well, if you want to do it nicely i would suggest getting someone to modify your manifold $$$, but unless you are going to rejet the carb and get a cam to suit you wont have a great power increase and alot of money can be spent setting this up properly. i had my 32/36 rebuilt and rejetted for the dato and my manifold cut and shut with the ford manifold and that cost me $350 then i got a mild cam to suit and it was ok... but only ok.
But they do sound nice 
|
|
|
