| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
OS Giken Twin Plate Parts
|
Wed, 27 April 2005 13:07
|
 |
Ok guys, I have an OS Giken TS2B Twin Plate to hopefully go behind my 1JZ. The catch is the plates are shagged and also bent (I suspect someone decided to put them in the wrong way once, it wasn't me btw...*sigh*), and the pressure plate is also shagged. The 'B' in the TS2B means that I'm after 204mm disks as well in case your weren't familiar with OS's naming convention.
I believe that the flywheel and intermediate plate will machine up ok, and also believe that my existing top cover/diaphragm is usable as is.
To enable me to rebuild the clutch (with out selling one of my kidneys to buy an OS Giken rebuild kit!), I can use my unsprung center plates and have them re-rivited onto new 5 puck clutch centers and then shim the pressure plate cover....if I'm going to all that effort I would really like to find someones shagged SPRUNG center plates that I can butcher.
Also if someone happens to have a set of plates and the pressure plate in new/good condition I'd be interested. *cough, yeah right, sif I'm that lucky :P*
I don't like my chances but I thought I'd ask 
in case anyone is wondering the bellow link shows pretty well what the setup looks like
http://babelfish.altavista.com/babelfish/urltrurl? lp=ja_en&trurl=http%3a%2f%2fwww.osgiken.co.jp% 2fpro_clutch%2fclutch%2fts2b.html
Cheers
Wilbo
|
|
|
