F.A.Q.    Register    Login    Home Members    Search

Classifieds » Engines, Accessories and other Mechanicals » 300/288 cams for 4age (dyno graph uploaded) Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
AE86 Levin Melbourne Regular Location: Melbourne Registered: May 2002	300/288 cams for 4age (dyno graph uploaded) Fri, 29 April 2005 01:25 Cams out of my engine when I was using these cams with my quad set up, it pulled 100kw at the rear wheels anyway: They are Tighe cams profile 1144C for Inlet: Duration 288 and .302"valve Lift (which is around 7.7 in mm) Profile 1155c for Exhaust Duration 300 and .324"valve lift (which is around 8.3 in mm) Before every one ask, They are new billets and not reground. They still run the factory shims over but you may need an aftermarket computer to run it. Reason why I am selling is because I am looking at some different coversion for my car so this is no use to me anymore. I am looking for around $550 for the pair cheers [Updated on: Tue, 30 August 2005 07:20] [Report message to a moderator]

	Subject	Poster	Date
	300/288 cams for 4age (dyno graph uploaded)	AE86 Levin Melbourne	Fri, 29 April 2005 01:25
	Re: 300/288 cams for 4age	AE86 Levin Melbourne	Tue, 14 June 2005 02:51
	Re: 300/288 cams for 4age	TRD-GTI	Wed, 15 June 2005 12:06
	Re: 300/288 cams for 4age	AE86 Levin Melbourne	Thu, 16 June 2005 01:50
	Re: 300/288 cams for 4age	TRD-GTI	Thu, 16 June 2005 07:31
	Re: 300/288 cams for 4age	Lachie	Fri, 24 June 2005 05:29
	Re: 300/288 cams for 4age	AE86Trader	Sat, 25 June 2005 01:24
	Re: 300/288 cams for 4age	b1gb3n	Mon, 27 June 2005 15:23
	Re: 300/288 cams for 4age	Lachie	Tue, 28 June 2005 06:04
	Re: 300/288 cams for 4age	b1gb3n	Tue, 28 June 2005 07:08
	Re: 300/288 cams for 4age	TurboRA28	Thu, 16 June 2005 11:00
	Re: 300/288 cams for 4age	psychofox	Sat, 25 June 2005 02:02
	Re: 300/288 cams for 4age	TRD-GTI	Sun, 26 June 2005 15:19
	Re: 300/288 cams for 4age	Lachie	Mon, 27 June 2005 13:03
	Re: 300/288 cams for 4age	psychofox	Tue, 28 June 2005 08:14
	Re: 300/288 cams for 4age	Hybrid_86	Thu, 28 July 2005 09:37
	Re: 300/288 cams for 4age	AE86 Levin Melbourne	Fri, 29 July 2005 01:05
	Re: 300/288 cams for 4age	adamaw11	Fri, 29 July 2005 01:29
	Re: 300/288 cams for 4age	rxbenny	Mon, 01 August 2005 13:28
	Re: 300/288 cams for 4age	boog	Tue, 02 August 2005 01:54
	Re: 300/288 cams for 4age	kojak	Fri, 05 August 2005 03:23
	Re: 300/288 cams for 4age	AE86 Levin Melbourne	Tue, 30 August 2005 07:19
	Re: 300/288 cams for 4age (dyno graph uploaded)	draven	Tue, 30 August 2005 07:45
	Re: 300/288 cams for 4age (dyno graph uploaded)	AE86 Levin Melbourne	Tue, 30 August 2005 08:30
	Re: 300/288 cams for 4age (dyno graph uploaded)	TRD-ST162	Tue, 30 August 2005 08:06
	Re: 300/288 cams for 4age (dyno graph uploaded)	GTV AE86	Tue, 30 August 2005 10:54
	Re: 300/288 cams for 4age (dyno graph uploaded)	rxbenny	Mon, 03 October 2005 16:56
	Re: 300/288 cams for 4age (dyno graph uploaded)	AE86Trader	Mon, 03 October 2005 21:07
	Re: 300/288 cams for 4age (dyno graph uploaded)	ancullen	Tue, 04 October 2005 00:05
	Re: 300/288 cams for 4age (dyno graph uploaded)	Stretch	Tue, 04 October 2005 11:03
	Re: 300/288 cams for 4age (dyno graph uploaded)	mattyae71	Fri, 07 October 2005 21:48

Previous Topic:	2JZ-GTE 440cc Injectors
Next Topic:	GZ20 Soarer G Series Diff Centre

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.