F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Advice on half-cut. Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
Kman Regular I supported Toymods Location: Sydney Registered: November 2002	Advice on half-cut. Thu, 19 December 2002 13:51 I just recently bought a RA65 ... Draven's one to be precise, and I have been looking around for a 1G-GTE half cut. I have found one at "Just Jap" wrecker for $3500. This to me seems a bit excessive, but it dose come with a following: Supra 1991 1GGTT 1/2 cut. HKS turbos, APEXi front-mount intercooler, MINES ECU, 5-spd. $3,500 http://www.justjap.com/Used_halfcuts.htm Third one down on the left. I would appreciate any advice on if the components justify the cost? And any ideas on where I would be able to find a cheaper yet just as good (or better) half-cut for the engine conversion would be greatly appreciated. [Report message to a moderator]

	Subject	Poster	Date
	Advice on half-cut.	Kman	Thu, 19 December 2002 13:51
	Re: Advice on half-cut.	silversup	Fri, 20 December 2002 02:42
	Re: Advice on half-cut.	Bugman	Fri, 20 December 2002 06:36
	Re: Advice on half-cut.	CrAiGzEE	Fri, 20 December 2002 07:39
	Re: Advice on half-cut.	Kman	Fri, 20 December 2002 07:42
	Re: Advice on half-cut.	CrAiGzEE	Fri, 20 December 2002 12:47
	Re: Advice on half-cut.	dcving	Sun, 22 December 2002 22:56

Previous Topic:	Who to make/install surge tank?
Next Topic:	MX83 lowered springs

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.