| Author | Topic |
|---|
I supported Toymods
Banned User
Location:
Brisbane
Registered:
May 2002
|
|
Your opinions please
|
Wed, 11 May 2005 07:46
|
 |
I found a radiator lying around that is pretty well a perfect fit for my ol Celica but the problem is the inlet and outlets are in the wrong positions 
And the way I have things setup, I'm having troubles trying to decide where to put the inlet as everything is stopping me putting it in the perfect position 
In this first image you can see the outlet from the engine and the area on the radiator I need to connect up.
Currently the filler on the radiator is in the position where the inlet should be, however having the inlet here would make running the water hose a PITA.
I'll also point out that if I had the inlet just below the filler it would obstruct the silicon bend from the intercooler to the throttle body.
I have scribbled on the pictures below where I have been thinking about putting the inlet. I need your thoughts on weather this is a good or bad idea.
So tell me what you think. Thanks
|
|
|
