| Author | Topic |
|---|
Location:
Newcastle
Registered:
April 2003
|
|
Need some info on 1/2JZ-GE
|
Sat, 14 May 2005 09:24
|
 |
I need to know what the dimensions for each motor are please.
I did a search and came up with about 750mm long and 350mm wide but need the height,as well as someone to confirm or deny the above numbers.
Also would a GTE inlet manifold fit the GE motors?My guess is they would but just need to be sure.
Thanks.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Need some info on 1/2JZ-GE
|
M.J.H | Sat, 14 May 2005 09:24 |
|
Re: Need some info on 1/2JZ-GE
|
gianttomato | Sat, 14 May 2005 09:30 |
|
Re: Need some info on 1/2JZ-GE
|
Norbie | Sat, 14 May 2005 11:28 |
|
Re: Need some info on 1/2JZ-GE
|
mrshin | Sat, 14 May 2005 12:19 |
|
Re: Need some info on 1/2JZ-GE
|
M.J.H | Sat, 14 May 2005 17:51 |
|
Re: Need some info on 1/2JZ-GE
|
Norbie | Sun, 15 May 2005 06:42 |
|
Re: Need some info on 1/2JZ-GE
|
gianttomato | Sun, 15 May 2005 08:49 |
|
Re: Need some info on 1/2JZ-GE
|
M.J.H | Sun, 15 May 2005 09:18 |
|
Re: Need some info on 1/2JZ-GE
|
gianttomato | Sun, 15 May 2005 11:34 |
|
Re: Need some info on 1/2JZ-GE
|
Norbie | Sun, 15 May 2005 11:42 |
