| Author | Topic |
|---|
I supported Toymods
Location:
I renounced punctuation
Registered:
May 2002
|
|
Upper control arm bolts
|
Sat, 28 December 2002 10:35
|
 |
Sorting out the suspension on my Corona Mk2, and I need to undo the upper conrtol arm bolts. There is minimal clearance between them and the bodywork, and the manual suggests I use an SST to undo them.
They are on tight, and look like they have never been undone in the last 27 years. I have saturated them with WD40, and have cut down a spanner to get in there a try to undo them (with hammer persuasion) to no avail.
Any helpful hints? Car is non mobile.
Cheers Dave.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Upper control arm bolts
|
gianttomato | Sat, 28 December 2002 10:35 |
|
Re: Upper control arm bolts
|
celicamad85 | Sat, 28 December 2002 10:46 |
|
Re: Upper control arm bolts
|
gianttomato | Sat, 28 December 2002 11:07 |
|
Re: Upper control arm bolts
|
ed_ma61 | Sat, 28 December 2002 11:34 |
|
Re: Upper control arm bolts
|
gianttomato | Sat, 28 December 2002 12:15 |
|
Re: Upper control arm bolts
|
jase | Sun, 29 December 2002 07:34 |
|
Re: Upper control arm bolts
|
gianttomato | Sun, 29 December 2002 08:15 |
|
Re: Upper control arm bolts
|
gianttomato | Tue, 31 December 2002 03:54 |
|
Re: Upper control arm bolts
|
Bugman | Tue, 31 December 2002 04:55 |
|
Re: Upper control arm bolts
|
gianttomato | Tue, 31 December 2002 05:14 |
|
Re: Upper control arm bolts
|
jase | Wed, 01 January 2003 06:16 |
|
Re: Upper control arm bolts
|
gianttomato | Wed, 01 January 2003 06:26 |
|
Re: Upper control arm bolts
|
jase | Thu, 02 January 2003 00:13 |
