F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Spray painting advice Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
myTA22 Regular Registered: December 2002	Spray painting advice Sun, 29 December 2002 13:07 Hi Everybody, My brother in law and I started spraying his Datsun 1600 today and have come across a few dramas in the process. I am hoping someone might be able to tell me what the hell is going on. We are using an acrylic gunmetal grey thinned in a 1:2 ratio i.e. 1 litre paint to two of thinners, we are painting at 30psi. The problems that we have come across are: - we are on the third coat and there still appears to be patchy areas - the paint is kinda rough - the gun has a bizarre pulse to it although everything is clean and tight Any advice would be greatly appreciated. We are going to have to leave it till Wednesday now before we can put the final coat on. Then we will be putting the clear coat on. Thanks for your help and advice Daniel [Report message to a moderator]

	Subject	Poster	Date
	Spray painting advice	myTA22	Sun, 29 December 2002 13:07
	Re: Spray painting advice	CLG	Sun, 29 December 2002 13:36
	Re: Spray painting advice	myTA22	Sun, 29 December 2002 13:47
	Re: Spray painting advice	CLG	Sun, 29 December 2002 13:53
	Re: Spray painting advice	myTA22	Sun, 29 December 2002 13:56
	Re: Spray painting advice	CLG	Sun, 29 December 2002 14:07
	Re: Spray painting advice	myTA22	Sun, 29 December 2002 14:10
	Re: Spray painting advice	myTA22	Sun, 29 December 2002 14:08

Previous Topic:	Attn: Oz Craig
Next Topic:	Roll Center Adjuster?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.