| Author | Topic |
|---|
Location:
Ipswich
Registered:
May 2002
|
|
Replacing power steering rack in an SV21
|
Mon, 23 May 2005 13:17
|
 |
As luck would have it, 2 years and 10 months after getting a reco rack in the SV21 Camry, it died.
So yes, seeing as my budget to fix the car at the moment is about $0, I'm planning on getting a second hand rack from the wreckers and putting it in, crossing my fingers and hope it lasts at least a little while.
I'm reading the Gregory's manual at the moment, and this is what it describes:
(2) Remove the bolt retaining the universal coupling to the steering gear pinion
Umm, how do you even reach this bolt? Is there a trick to it? I can barely even see it!
(5) Remove the retaining bolts and nuts and remove the crossmember from the vehicle underbody
Umm... Doesn't the engine bolt to this crossmember?
(6) Remove the retaining bolts and remove the covers from beneath the engine
Do they mean the plastic covers?
(7) Remove the retaining bolts and nuts and remove the center member from the vehicle
Again, doesn't the engine bolt to this?
( Remove the retaining bolts and the through bolt and remove the rear engine mounting bracket and rubber insulator from the vehicle
Wouldn't the engine fall out???
Hmm... This looks, interesting. Any ideas?
Thanks in advance...
|
|
|
