| Author | Topic |
|---|
Location:
Ipswich
Registered:
May 2002
|
|
Help wiring SV21 Cruise Control
|
Thu, 26 May 2005 08:52
|
 |
I was at the wreckers today when I spotted a factory cruise control on an SV21, so I got the bits (what the guy said was "all the bits I need" (which I think he's wrong).
Need some help wiring...
First of all, I've got the actuator unit that goes in the engine bay, I've got the brake pedal switch, and I've got the main switch (that goes under the center aircond vent, sort of). I believe I'm missing (at least) the control unit, and the set/resume switch. Not sure if I'm missing anything else?
From this picture, I've figured that C is the vacuum pump, and B is the actuator (although the wire colors don't match, mine are WB, G and RY; in the Gregory's book it says WB, GB, RG). What is A?
I've also noticed that my Camry (wagon CSX) already has the plugs for the actuator unit (A, B and C) and a plug to plug in the main switch. Since they've put the wiring in for those, would they have put in the wiring for the brake switch and resume switch? I can't find it.
Also, where is the control unit, and where is the set/resume switch? I couldn't find them on the donor car...
Thanks heaps
|
|
|
