| Author | Topic |
|---|
Registered:
May 2002
|
|
Injector Wiring
|
Mon, 06 January 2003 07:27
|
 |
I'm trying to rewire a computer loom for a 3TGTE, but i'm confused about how the injectors are wired.
Looking at the diagram here-
The injectors #1,#3 and #4 are wired together with the yellow +ive, but then injector #2 connects to this wire in a different place further down the loom.
This is also the same for the white wire, but then the #2 white wire is bridged to the other white wire further down the loom.
Why do they wire it like this as opposed to just wiring ALL injector +ives together and ALL injector grounds together and having one high amp wire from them all? The only reason i can think of why this is done is time delay or somehow separate the duty cyles of the injectors???
Hope someone understands what i'm getting at.
Cheers
Robert
|
|
|
| | Subject | Poster | Date |
|---|
 |
Injector Wiring
|
inferno | Mon, 06 January 2003 07:27 |
|
Re: Injector Wiring
|
Norbie | Mon, 06 January 2003 07:38 |
|
Re: Injector Wiring
|
inferno | Mon, 06 January 2003 08:12 |
