Toymods Car Club Inc: Tech & Conversions => 3S-GTE Shimless Bucket Conversion

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » 3S-GTE Shimless Bucket Conversion Show: Today's Posts :: Show Polls Email to friend

Author

Topic

Toobs
Forums Junkie

I Supported Toymods

Location:
Sydney
Registered:
December 2002

3S-GTE Shimless Bucket Conversion	Thu, 09 June 2005 12:28

For those who don't know about this conversion you can see the details at the following page. http://www.rossmachineracing.com/3sbucket.html Now I'm just looking into the 1ZZ shimless bucket conversion for myself and doing some measurements etc. I have ordered and received the largest sized bucket available without ordering from Japahhhhhn (Part: 13751-46370). Now unfortunately my head is at the engine builders so I can't measure the 3S parts myself, can anyone else post up accurate measurements (esp weight) on the GenII and GenIII buckets + shims? And I'm not talking about specs stolen from the page mentioned above or ripped from an unknown website. UZZ Bucket specs Part No: 13751-46370 Weight: 29.09g Outer Diameter: 30mm* Inner Diameter: 29mm* Height: 36mm* "Shim" to top of bucket: 5.74mm Marking: 74 *These measurements need to be measured more accurately but I can't find my verniers or micrometer at the moment. It also appears to have some sort of anti friction coating on the inside of the bucket and the crown. Can anyone confirm that this is what it is? Yes I know it is shimless and so calling it a "shim" is incorrect but you guys know the lump of metal I'm on about. Pics: Sorry the digi cam refused to take a clear picture of the crown for some reason. Note the coating. Note the coating showing on the bevelled edges. [Updated on: Fri, 10 June 2005 06:38] [Report message to a moderator]

Current Time: Tue Jul 22 03:42:09 UTC 2025

Total time taken to generate the page: 0.0064640045166016 seconds

.:: Contact :: Home ::.