I'm having an annoying issue with my twin plate setup in the GT8. It was there with the W58 but at that time i thought it was actually a problem with the box not the clutch...still there with the tremec (actually worse) so 99% sure it's the throwout bearing.
Basically when the engine is under load at low rpm the throwout bearing rattles like a bitch...very very noisey. as soon as you have any decent revs on board or you are only dawdling along the noise goes away.
I don't think the clutch fork is pulling the bearing off the pressure plate enough so they just touch and under these conditions and make a hell of a racket.
I have no idea why only under load at low rpm but does anyone have a potential fix? If i have to pull the whole thing out again i won't be a happy camper but could be what it comes down to as you can't live with this noise.
Tue, 14 June 2005 03:32
