| Author | Topic |
|---|
I Supported Toymods
Location:
Sydney
Registered:
December 2002
|
|
3SGTE Camshaft Specifications
|
Wed, 15 June 2005 03:39
|
 |
Boosted this info from a GT4OC thread that was boosted from some MR2 website.
Some interesting info!
3SGTE Standard Specs
Note: Gen1 cams are not directly interchangable with Gen2 or Gen3 but Gen2 & 3 cams are interchangable.
No Gen1 cams listed are list here for this reason.
Stock Gen2:
Intake & Exhaust
Advertised duration 236 degrees
Duration @ 0.010" lift: 260.0 degrees
Duration @ 0.020" lift: 211.0 degrees
Duration @ 0.050" lift: 160.5 degrees
Max Lift: 8.52mm (0.335")
Stock Gen3 Intake:
Advertised duration 240 degrees
4 degrees more duration, .5mm more lift than the 2nd gen
i.e.
Duration @ 0.010" lift: 264.0 degrees
Duration @ 0.020" lift: 215.0 degrees
Duration @ 0.050" lift: 164.5 degrees
9.02mm Max Lift
Stock Gen3 Exhaust:
(Same as Gen2)
Advertised duration 236 degrees
Duration @ 0.010" lift: 260.0 degrees
Duration @ 0.020" lift: 211.0 degrees
Duration @ 0.050" lift: 160.5 degrees
Max Lift: 8.52mm (0.335")
HKS
HKS 256 cams:
Duration @ 1mm lift: 216 degrees
Max lift: 9.0
HKS 264 cams:
Duration @ 1mm lift: 224 degrees
Max lift: 9.2mm
The HKS 2nd gen "low lift" 264 cams use a lobe centerline of 110deg ATDC intake, and 103 deg BTDC exhaust.
HKS 272 cams:
Duration @ 1mm lift: 232 degrees
Max lift: 9.4mm
The HKS 2nd gen "low lift" 272 cams use a lobe centerline of 110deg ATDC intake, and 108 deg BTDC exhaust.
HKS "high lift" 256 cams:
Duration @ 1mm lift: 216 degrees
Max lift: 9.5mm intake, 9.2mm exhaust
HKS "high lift" 264 cams:
Duration @ 1mm lift: 224 degrees
Max lift: 10.0mm intake, 9.7mm exhaust
HKS "high lift" 272 cams:
Duration @ 1mm lift: 232 degrees
Max lift: 10.4mm intake, 10.2mm exhaust
The HKS 3rd gen 272 "high lift" cams use a lobe centerline of 111deg ATDC intake, and 116 deg BTDC exhaust.
TODA
NOTE: These are advertised duration only, usually assumed to be 0.020" or .5mm.
Duration Max Lift(mm)
256_____8.5
256_____9.0
264_____8.5
264_____9.0
264_____10.3
272_____8.5
272_____9.0
272_____10.3
280_____10.3
288_____8.5
288_____9.0
288_____10.0
288_____10.5
304_____8.5
304_____9.0
304_____10.5
310_____10.5
320_____10.8
JUN
1004M-T001 (intake)
1004M-T101 (exhaust)
256° duration 9.0mm lift
1004M-T002 (intake)
1004M-T102 (exhaust)
264° duration 9.0mm lift
1004M-T003 (intake)
1004M-T103 (exhaust)
272° duration 9.3mm lift
|
|
|
| | Subject | Poster | Date |
|---|
 |
3SGTE Camshaft Specifications
|
Toobs | Wed, 15 June 2005 03:39 |
|
Re: 3SGTE Camshaft Specifications
|
Toobs | Wed, 15 June 2005 03:49 |
|
Re: 3SGTE Camshaft Specifications
|
Classique71 | Wed, 15 June 2005 09:07 |
|
Re: 3SGTE Camshaft Specifications
|
Toobs | Thu, 16 June 2005 01:37 |
|
Re: 3SGTE Camshaft Specifications
|
Classique71 | Thu, 16 June 2005 02:29 |
|
Re: 3SGTE Camshaft Specifications
|
Joshstix | Thu, 16 June 2005 02:47 |
|
Re: 3SGTE Camshaft Specifications
|
JustenGT4 | Thu, 16 June 2005 03:10 |
|
Re: 3SGTE Camshaft Specifications
|
sikx5 | Thu, 16 June 2005 04:54 |
|
Re: 3SGTE Camshaft Specifications
|
Joshstix | Thu, 16 June 2005 08:34 |
|
Re: 3SGTE Camshaft Specifications
|
Toobs | Thu, 16 June 2005 11:34 |
|
Re: 3SGTE Camshaft Specifications
|
-==L=a=N=c=E==- | Thu, 16 June 2005 23:46 |
|
Re: 3SGTE Camshaft Specifications
|
Classique71 | Fri, 17 June 2005 02:28 |
|
Re: 3SGTE Camshaft Specifications
|
-==L=a=N=c=E==- | Fri, 17 June 2005 05:45 |
|
Re: 3SGTE Camshaft Specifications
|
510rob | Fri, 17 June 2005 07:27 |
