Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » Leaning out problem....

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
Southo
Regular


I supported Toymods

Location:
Sydney
Registered:
August 2002
Leaning out problem.... Sun, 17 July 2005 02:16 Go to previous message
Arrgghhh, modified cars are going to send me to the loony bin (that's after I file for bankruptcy first)

My car is leaning out terribly and I would like the opinions of those who have either suffered and corrected the problems I am having, or can offer some sensible suggestions as to what to do next...

The basics
Car is MX83 Cressida with Aristo 2JZGTE fitted. Factory everything except for ... 3 inch Exhaust, Intercooler and Pipework, Walbro 255lph (in tank) fuel Pump. Only other mod is a Gizzmo Fuel Cut Defender (which seems to be working fine). Boost runs to about 9-10psi on the first turbo and then from around 4,000pm onwards, runs to 16-17psi on the second turbo.

The problem
It is leaning out to buggery at full throttle. At the toymods dyno day, It was not able to go above about 5,500 as it started to lean out very badly so the run was aborted (see attached dyno sheet)
http://www.pbase.com/driftking/image/45687938.jpg

However, If using up to around 75% throttle - it runs all the way to redline without any problem, and does not lean out, in fact the AFR is almost perfect.

what we have done so far
Measured the fuel pressure
- 42psi with regulator seeing vaccum and about 46 psi with the regulator disconnected
Measured the Voltage at the pump
- 12V Constant
Replaced spark plugs
- re-gapped to .8mm (from 1.1 previously)
There is no problem with the fuel filter
Re-calibrated the Throttle Position Sensor to be zero volts at 0% (although if anyone knows what the voltage reading at 100% throttle is supposed to be, it would be handy to see if the TPS is going over 100%)


any suggestions ???


[Updated on: Sun, 17 July 2005 13:50]

  Send a private message to this user    

SubjectPosterDate
Read Message   Leaning out problem....  SouthoSun, 17 July 2005 02:16
Read Message   Re: Leaning out problem.... NorbieSun, 17 July 2005 07:45
Read Message   Re: Leaning out problem.... SouthoSun, 17 July 2005 14:38
Read Message   Re: Leaning out problem.... oldcorollasSun, 17 July 2005 16:42
Read Message   Re: Leaning out problem.... NorbieMon, 18 July 2005 04:04
Read Message   Re: Leaning out problem.... Chris DaveySun, 17 July 2005 23:25
Read Message   Re: Leaning out problem.... SouthoMon, 18 July 2005 01:45
Read Message   woo hoo - 245kW - Leaning out problem....fixed....:) SouthoMon, 25 July 2005 09:58
Read Message   Re: Leaning out problem.... sideshowMon, 25 July 2005 10:04
Read Message   Re: Leaning out problem.... SouthoMon, 25 July 2005 13:21
Read Message   Re: Leaning out problem.... NorbieTue, 26 July 2005 00:23
Read Message   Re: Leaning out problem.... SouthoTue, 26 July 2005 01:47
Read Message   Re: Leaning out problem.... NorbieTue, 26 July 2005 01:56
Read Message   Re: Leaning out problem.... SouthoTue, 26 July 2005 02:27
Read Message   Re: Leaning out problem.... MS-75Tue, 26 July 2005 10:06
Read Message   Re: Leaning out problem.... sideshowTue, 26 July 2005 11:34
Previous Topic:3TGTE 200rwkw???
Next Topic:3TC head on 2TC block

Goto Forum:
-=] Back to Top [=-

Current Time: Tue Jul 22 13:14:25 UTC 2025

Total time taken to generate the page: 0.0047740936279297 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.