F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18R bottom end vs 18RGU Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
bnicho Regular Location: Melbourne, Victoria, Aust... Registered: September 2004	18R bottom end vs 18RGU Wed, 27 July 2005 03:09 How similar are the 18R and 18RGU bottom ends? Is the block, crank, rods, even pistons all the same? If you had a fresh reco 18R and a worn out complete 18RGU, could you reco the head and bolt it to the 18R bottom end? (Using the correct 18RGU parts as required and renew any worn bits, gaskets etc of course. ) Thanks. [Report message to a moderator]

	Subject	Poster	Date
	18R bottom end vs 18RGU	bnicho	Wed, 27 July 2005 03:09
	Re: 18R bottom end vs 18RGU	bbaacchhyy	Wed, 27 July 2005 03:23
	Re: 18R bottom end vs 18RGU	jeffro RA28	Wed, 27 July 2005 08:05
	Re: 18R bottom end vs 18RGU	Mr DOHC	Wed, 27 July 2005 09:40
	Re: 18R bottom end vs 18RGU	bnicho	Thu, 28 July 2005 06:23
	Re: 18R bottom end vs 18RGU	barned01	Thu, 28 July 2005 12:31
	Re: 18R bottom end vs 18RGU	bbaacchhyy	Thu, 28 July 2005 22:11
	Re: 18R bottom end vs 18RGU	Steve M	Thu, 28 July 2005 14:55
	Re: 18R bottom end vs 18RGU	barned01	Fri, 29 July 2005 01:18

Previous Topic:	2003 Corolla Conquest engine revs query
Next Topic:	Looking at an 18r-g on the weekend - what to check?

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.