| Author | Topic |
|---|
Registered:
December 2002
|
|
Cam Gasket and Fuel type for 3t-gteu? blah blah..
|
Mon, 27 January 2003 13:40
|
 |
Few questions once again.
1. Where the hell can i get a cam gasket/top-end gasket(I believe it requires 2, 1 for the top and one further down) - for a 3t-gteu, and pricing it from Toyota here in New Zealand, they quoted $170NZ which is just fucking CRAZY, are there any equivalent etc? i ask this because yesterday, i took out the first 4 leads(to the spark plugs,2 sparks per cylinder), and the bay was filled up with oil right up to the gasket, but cyc3/4 were clean, no oil at all, and on the cam cover, the front end bolts were finger tight, but the back were tight, someones been pissing, tightened them up, MAY have fixed the leak maybe? but I'm still after a gasket for it.
2. What fuel should i be running my engine on? tried 91 runs fine on that.
3. CT20 Turbo, say i crank the boost upto 10psi, is the turbo gonna spool up any quicker? eg, develop boost at slightly lower rev's?
4. The breather/blow-by pipe, can someone take a picture of their breather pipe going back into the air turbo intake, mines been disconnected by some dipshit, and im going to hafta reconnect.. the fumes are getting nasty.
|
|
|
