| Author | Topic |
|---|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 06:49
|
 |
well ive decided im going to start parting out my old t18, im pretty sure i can stick with the move to the wagon.
so the hole car will be parted out
ask for anything you need, a few goodies off the top of my head...
1000- engine
-2TG/3T hybrid 1mm over bore- 1812cc (7 000 km's since rebuild)
-Head- 11111-88260
-polished ports
-twin 40mm dellorto side draught carburetors
-balanced crank with ground journals
-ACL cast pistons, flycut for DOHC
-10:1 compression ratio
-blueprinted
-2tgeu electronic ignition
-8mm top gun leads
did a 15.8 at WSID in my t18
started first kick every time, never had a issue with it and did very regular oil changes
seriously is a quality built engine, with lots of new parts like timing gear and gaskets, spent $2000 in the build.
has been dyno tuned by frank klenig, this alone cost 500ish?
300- Wheels
Simmons V4 x2 15x7, x2 15x8, one 7 and one 8 is buckled, new rims can be bought for these and bolted together quite easily, centres have been powdercoated black DEEP DISH
200- RA 40 diff with ta22 4.1:1 locked centre drum to drum no cables
40- checkerplate centre console
150- t-18 side skirts
200- exhaust, genie 4 to 1 extractors to 2 1/2 inch to 2 inch
50- electronic low pressure fuel pump
60- short gear shift, knob, boot and checkerplate surround (suits T-50)
![[/url]](http://img301.imageshack.us/img301/3476/shift3tt.th.jpg)
70- oil catch can five star racing RRP $115 near new
![[/url]](http://img301.imageshack.us/img301/5396/catch3ow.th.jpg)
450- genuine recaro reclinable
![[/url]](http://img301.imageshack.us/img301/5307/bucket9gm.th.jpg)
30- oldschool harness, never used, not legal
![[/url]](http://img354.imageshack.us/img354/5954/britax8gf.th.jpg)
offers- brand new speco mechanical oil temp gauge
![[/url]](http://img354.imageshack.us/img354/8751/temp6vz.th.jpg)
40- radiator overflow
![[/url]](http://img354.imageshack.us/img354/8048/overflow2ew.th.jpg)
7.50- a night with cam
![[/url]](http://img301.imageshack.us/img301/2764/cam14xk.th.jpg)
[Updated on: Mon, 15 August 2005 07:22]
|
|
|
Registered:
October 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 07:24
|
|
|
got pics of the wheels? how buckled is buckled?
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 07:26
|
|
|
click my link to members rides, heaps of pics of wheels, ahh theyre fukn buckled aye, they would have to be replaced
|
|
|
Location:
Tasmania
Registered:
April 2005
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 08:18
|
|
|
30 posted for the seatbelt?
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 08:28
|
|
by seatbelt i am assuming you mean the factory lap sash?
a mate has shown interest in a lot of the suspension gear, Evosti is in first for the adjustable panhard if my mate doesnt grab it.
tailshaft is gone.
RCA's are gone
|
|
|
Location:
Tasmania
Registered:
April 2005
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 08:59
|
|
|
No, the harness.
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 09:04
|
|
no, the harness is $50
atm everything is pick up only, when i get desperate ill start mailing some parts
|
|
|
Location:
cambo
Registered:
May 2002
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 09:13
|
|
pm sent again 
you KNOW you want to put me ahead of your mate hehe. 
|
|
|
Location:
cambo
Registered:
May 2002
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 09:14
|
|
BTW i can offer a BRAND NEW brake bias adjuster to sweeten the deal if necessary, lemme know 
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 09:16
|
|
|
the rear sway bar actually wont fit, the holes mount vertically on the t18, sprinters need horizontal mounting holes, front bar should fit fine though and panhard rod is identical, ill let you know asap evosti
|
|
|
Location:
cambo
Registered:
May 2002
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 09:25
|
|
|
ill try and find some comparison picks of the rear swaybars cause i reckon i could make it fit anyway, as i understand the mounting points on the diffs are the same but maybe the links are different? anyway i understand your mate got first dibs
|
|
|
Banned Again
Location:
ADELAIDE THE HOON STATE
Registered:
June 2005
|
|
|
Banned Again
Location:
ADELAIDE THE HOON STATE
Registered:
June 2005
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Thu, 11 August 2005 09:58
|
|
yo jesse...
keen on the Harness and the brace if you still have
Get in touch please....
Cheers, Chris
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 01:49
|
|
KE55-
yeha i can mail you over the brace and the harness
40+50+ postage, ill send it COD if you want
pics of my beloved simmons-
these really are nice rims, ive never seen anything like them and would definately keep them myself and replace the rims but im running 5x114 on the new car and cant see myself going back to the dorift too soon.
as you can see the 7 at the front isnt too bad, if its not buckled you could probably just pop that lip back in with a hammer...
the 8 however clearly needs to be replaced
|
|
|
Location:
Pilbara
Registered:
November 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 02:21
|
|
50- Front sway bar 28mm whiteline
30- Rear sway bar 18mm whiteline
100- trailing arms with urethane bushes, near new!
50- adjustable whiteline panhard rod
150- whiteline flat out strut brace
300- front struts with commodore brakes and king springs
150- rear koni yellow adjustables
50- rear kings
300- front struts with commodore brakes and king springs
Interested in all of the above but especially in the Front struts, Brakes and king springs.
Will pm you mate.
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 02:23
|
|
i think all of the above has been sold except fpr the trailing arms and strut brace.
and just rembered those rear kings have been chopped a coil
|
|
|
Location:
Pilbara
Registered:
November 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 02:29
|
|
|
Bugger , how much better did the commonwhore brake conversion go? Was it a hard job to do?
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 02:58
|
|
commodore brakes were awesome.
i did not do the conversion.
|
|
|
Location:
Adelaide
Registered:
July 2005
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 03:26
|
|
|
you still got the panhard rod?
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 03:35
|
|
|
yep, mate has dibs on it though
|
|
|
Location:
cambo
Registered:
May 2002
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 11:54
|
|
so the swaybars and panhard rod are gone then 
|
|
|
Location:
Sydney
Registered:
November 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 14:14
|
|
that mate better be me!  oompa needs to spend his money on the turbo conversion. 
|
|
|
Banned Again
Location:
ADELAIDE THE HOON STATE
Registered:
June 2005
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Fri, 12 August 2005 16:28
|
|
yeh jesse that would be great
pm me for address and to finalise details
Cheers, KE55
|
|
|
Location:
Wollongong, NSW
Registered:
April 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Sat, 13 August 2005 12:27
|
|
|
pm sent
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Mon, 15 August 2005 07:20
|
|
|
sway bars, strut brace, struts, rear shocks and springs, trailing arms all sold
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Mon, 15 August 2005 07:21
|
|
|
and panhard rod
|
|
|
Location:
Townsville North Qld
Registered:
June 2003
|
 Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Tue, 16 August 2005 00:12
|
|
You still got the crossmember for the T18?? if so, how much?? email me at O_man_ra23@yahoo.com.au
Cheers, Owen
|
|
|
Location:
Castle Hill, Sydney
Registered:
February 2004
|
|
Re: Jesse's T18 wrecking, heaps of ae86/ke70/t18 parts
|
Tue, 16 August 2005 04:39
|
|
yeah i will be selling crossmemeber as a package-
$200 you get,
KE70 steering column
KE70 rack, rebuilt, with new rack ends
KE70 crossmemebr with T series mounts, (might be bent, if so $200 for all of the above
this would be a bolt in rack and pinion kit for all t18's
|
|
|
