Author | Topic |
I supported Toymods
Location: Adelaide
Registered: July 2004
|
MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 05:15
|
|
I was told today that the brake pads for an MA70 and GZ20 in the front are identical, does this mean that when you perform the 300mm upgrade you are only really upgrading the rotors and you dont need to change the calipers?
the reason I am asking is I have a set of rotors without calipers sitting at home, is it worth getting them machined up and fitting them in the hope of having some sort of upgrade? as larger rotor surface area means better heat dispersion
Cheers
Matt
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 05:18
|
|
even better!
can someone with one of those EPC Part Number things please tell me if the brake calipers off an MA70/JZA70 have the same part number as the GZ20 calipers
and if the brake pads are the same (this is just to establish whether the person who told me is talking shit or not)
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 05:18
|
|
You'll probably find even if the caliper is the same, the position of the caliper wont be right.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 05:25
|
|
nath could you care to elaborate on that one dude?
im not quite following you...
you do know the MA70 brake conversion is a bolt on conversion...i.e. hubs dont need to be changed etc
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 05:44
|
|
NOTE: Although I could be wrong and the actual brackets on the strut are where the difference is, by all means, prove me wrong
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 06:00
|
|
ahhhhhhh
thanks for clearing that up
I might give it a whirl when I do the front pads and just see if it works
if it doesnt then its no biggie i guess
|
|
|
I supported Toymods
Location: Perth
Registered: May 2002
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 06:02
|
|
Exactly, will only take 30 secs to compare.
|
|
|
Registered: August 2002
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 09:17
|
|
You do need to swap the calipers when swapping over to the bigger ma70 rotors.
|
|
|
Location: Newcastle, Australia
Registered: August 2005
|
Re: MA70 vs GZ20 Brake Calipers
|
Tue, 16 August 2005 09:43
|
|
I know that Rear's are identical, not sure about fronts.
I stole my mates MA rears and put them on my GZ. Straight fit.
Having both cars sitting in the yard is useful.
Pads are identicle, same as MX73 Cressida.
|
|
|
Registered: March 2004
|
Re: MA70 vs GZ20 Brake Calipers
|
Wed, 17 August 2005 05:14
|
|
Cailpers are the same. Brake pads are the same. The difference is is the brackets that the calipers slide on. Obvously the bigger rotors have bigger brackets to clear them.
|
|
|
I supported Toymods
Location: Adelaide
Registered: July 2004
|
Re: MA70 vs GZ20 Brake Calipers
|
Wed, 17 August 2005 05:23
|
|
snail you have a group of pm's
all from me...
|
|
|