| Author | Topic |
|---|
Location:
Sydney
Registered:
May 2002
|
|
3T-GTE Intercooler Pipe "SOLD"
|
Thu, 18 August 2005 01:15
|
 |
This 2 inch pipe is made for a standard 3TGTE inlet manifold. You can't see it in the pic but it has a bracket to mount it to the front rocker cover bolt.(Like the standard pipe). It has a Turbosmart BOV adaptor welded into it and it is ceramic coated. This pipe was used in a Celica and it's made to go through the bumper bar mounting bracket hole at the front of the car BUT the pipe has been cut before it gets there. It's probably about 6 inches short. With a bit of modification (ie-welding some more length on) you'll have a quality intercooler pipe.
I had this made by a leading Sydney exhaust shop and it's quality.
I'm not running it because i've gone to a custom inlet manifold.
$80. I'm in Kenthurst which is just Noth West of Sydney.
Rudi
0410 317605
[Updated on: Thu, 18 August 2005 11:24]
|
|
|
| | Subject | Poster | Date |
|---|
 |
3T-GTE Intercooler Pipe "SOLD"
|
rudi.b | Thu, 18 August 2005 01:15 |
