Author | Topic |
Location: Parramatta
Registered: July 2002
|
Head Gasket delimas (REALLY NEED HELP/advice)
|
Sun, 04 September 2005 11:18
|
|
the problem is that i think the head gasket is on the wrong way round i need someone to confirm this, as the mchanic i think screwed it i had my oil mix with my coolent but the coolent hasnt mixed with the oil through the bottom end, just in the head (thank god)
I hope some one can answer all of this it would be a huge help!
the current head gasket a HKS 1.6 mil
under this part there is a oil feed hole i think its oil anyway, as you can see the gasket is blocked!
here is the gasket as you can see the oil feed hole goes nowhere.
this is an old coper HG from the motor some time ago.
this one points out more holes in the gasket, well more then the HKS, why is this the case do i need this extra hole????
|
|
|
Location: MACKAY
Registered: May 2002
|
Re: Head Gasket delimas (REALLY NEED HELP/advice)
|
Sun, 04 September 2005 12:39
|
|
Yes that head gasket is definitely on the wrong way , How long did you run the motor like that as there would not of been any oil to the head and you may have damaged the cam journals and head .
|
|
|
Location: Parramatta
Registered: July 2002
|
Re: Head Gasket delimas (REALLY NEED HELP/advice)
|
Mon, 05 September 2005 00:28
|
|
no because i have a line taken from the block to the head this was always a saftey measure. so the head always had oil pressure. (have a guage)
|
|
|
Location: Central Coast, NSW
Registered: February 2005
|
Re: Head Gasket delimas (REALLY NEED HELP/advice)
|
Mon, 05 September 2005 00:58
|
|
Your mechanic put the head gasket on the wrong way?
|
|
|
Location: Parramatta
Registered: July 2002
|
Re: Head Gasket delimas (REALLY NEED HELP/advice)
|
Mon, 05 September 2005 02:06
|
|
look that way now my next question is that the cooper HG has an extra hole in it where as th hks is missing that should is that extra hole neeed, whats the go?
|
|
|