| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
Please help to identify this axle housing /diff
|
Tue, 06 September 2005 05:29
|
 |
Hi guys, I have stumbled across a complete live axle assembly from some sort of Hi-Lux.
No, the build pate from the vehicle was nowhere in sight.
General Description:
Width: approximately; 1400mm, drum face to drum face.
Input shaft offset; 65-70mm to RH side.
10 bolt housing, with one longer bolt at the 7:00 O'clock position.
Diff housing, to axle housing aperture approximately; 9" in diameter.
Without disassembling the whole thing, the crown wheel appears to be about 8" in diameter.
Three ribs on either side of the centre housing, the top rib, is actually continuous from left to right. ie, does not sit flush with the centre housing, but projects beyond it.
From memory(which is quite vague, being an old fart) this assembly looks nothing like the "F" series from a MKII Corona.
The Hi-Lux had been fitted with a 308 on gas, and this diff seems to be an overkill for a standard dual cab, so somewhere along the line, it has been swapped over.
Any help in identifying this diff would be greatly appreciated.
cheers Chuck.
|
|
|
