Author | Topic |
Location: sydney
Registered: March 2005
|
4agze S/C oil port
|
Wed, 14 September 2005 07:56
|
 |
yo guys i wanna fill up my supercharger with oil where is the inlet to fill up the s/c , like where abouts , its dark at side and cant really see so need a hand
thanks
|
|
|

Location: Sydney
Registered: January 2004
|
|
|

Location: Melbourne
Registered: May 2002
|
Re: 4agze S/C oil port
|
Wed, 14 September 2005 10:09

|
 |
I purchased the genuine oil, which come with a syringe and length of clear tubing, which simply shoves down the filler neck...
Due to purchasing 4 x 50ml cans of the stuff, I had spare syringes, which were used to suck the old gunky black crap out... Makes it easy to measure the 130ml's that it needs to be, good to have some on hand too.
|
|
|

Location: Sydney
Registered: January 2004
|
Re: 4agze S/C oil port
|
Wed, 14 September 2005 10:33

|
 |
inertia wrote on Wed, 14 September 2005 20:09 | I had spare syringes, which were used to suck the old gunky black crap out...
|
...but there's a drain hole on the bottom of the supercharger as well..
|
|
|

Location: Toronto, Downtown
Registered: September 2004
|
Re: 4agze S/C oil port
|
Wed, 14 September 2005 10:53

|
 |
you can buy syringes from any chemist and it shouldnt cost more than $2
there is a dipstick painted yellow located ontop of the supercharger on the opposite side to the engine it isnt the pull type you need to unscrew it.
You need to push slowly on the syringe otherwise it will just spurt out of the hole. My advice would be to buy some clear hose that will fit into the oil hole aswell as fitting onto the end of the syringe. That way you can stick the tube right into the hole and you wont get oil everywhere.
You dont need genuine toyota supercharger oil you can use mobil one holden supercharger oil or as i use fuchs fully synthetic 0w 20 oil.
|
|
|

Location: Melbourne
Registered: May 2002
|
Re: 4agze S/C oil port
|
Wed, 14 September 2005 11:04

|
 |
Indeed there is a drain plug, but seeing as we were also doing this at night, we couldn't be bothered with it. The syringe sucked out 122ml's or so.
The genuine oil I purchased from a contact over at twincam.org, along with some other parts at better-than-aus prices. The oil was about $10 per 50ml kit.
|
|
|

Location: Newcastle
Registered: July 2003
|
Re: 4agze S/C oil port
|
Fri, 16 September 2005 00:22

|
 |
just goto the chemist as said above. $0.75 is what a suitable sryinge cost me. then just a spare length of vaccuum hose.. just drain it out by undoing the plug at the bottom.
im currently running mobil 1 5w30 in there and it works a treat on both gze's
|
|
|

Location: Brisbane
Registered: February 2003
|
Re: 4agze S/C oil port
|
Fri, 16 September 2005 01:21

|
 |
I think only the newer superchargers with the smaller pulley have the yellow wingnut, as the one on my ae92 gze was certainly not yellow and a bastard to get to.
|
|
|

Location: Newcastle
Registered: July 2003
|
Re: 4agze S/C oil port
|
Fri, 16 September 2005 01:25

|
 |
my aw11 and my mates gze levin both have yellow dip sticks. rember paint can wear/chip off etc,
|
|
|

Location: Toronto, Downtown
Registered: September 2004
|
Re: 4agze S/C oil port
|
Fri, 16 September 2005 06:07
|
 |
monkeymajik wrote on Fri, 16 September 2005 11:21 | I think only the newer superchargers with the smaller pulley have the yellow wingnut, as the one on my ae92 gze was certainly not yellow and a bastard to get to.
|
as said above mine also is yellow and is an aw11 afm gze but your right its a prick to get to
|
|
|