F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 1JZ-GE questions Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ChrisTH Occasional Poster Location: Thailand Registered: September 2005	1JZ-GE questions Thu, 22 September 2005 07:51 Hi, This is my first post here so please bear with me. I have a bit unusual mod here in Thailan. It is a Hiace, where I put in a 1J engine a couple of years ago. My reasons was the bad performance of the Diesel engine, and the high repair costs (I blew a Cylinder head). And the fact that complete 1J engines are VERY cheap here (I bought mine for about 600 US$, with A/T, Power steering, A/C. Basically a "plug and play" engine). I was quite satisfied with the conversion, but there are still minor things that bothers me. They are: 1. Bad fuel economy (doing about 7KM/l on highways). 2. Gear change "holes". (engine output drops when it changes gears). 3. Partly engine "cut-out" with rising engine temperatures. I do not expect to get the fuel economy of a sedan, but I still think I "deserve" more. The "holes" are annoying. I many cases, I loose speed when the engine changes to a higher gear (primarely in the 120-130 KM/h area where I really want the power of the engine). Then I have to kick-down and let it pick up speed so the rpms are sufficient for the higher gear. Recently it started to have problems after 100+ KM drives. The engine almost stalls. It will drive, but too much accellerator will cause the engine to cut out(max speed is about 70 KM/h). That is a problem that came up not long ago, and was never there before. I have changed fuel filters, all the ECU relays, but the problem is still there. I have just inspected the harness, and there is at least 1 wire cut, and 1 not connected. Looking for pin-outs/wire color codes has been unsuccessful (a 22-16-26 ECU), so I am really in need of help now. Are any of you able to help me with some manuals and point me in the right direction? I have decided to do the job myself because very few garages will even consider working on this Hiace (it is a bitch, almost no working space. I wonder how they managed to get the engine in there in the first place). Chris [Report message to a moderator]

	Subject	Poster	Date
	1JZ-GE questions	ChrisTH	Thu, 22 September 2005 07:51
	Re: 1JZ-GE questions	CrUZsida	Thu, 22 September 2005 08:28
	Re: 1JZ-GE questions	ChrisTH	Thu, 22 September 2005 08:45
	Re: 1JZ-GE questions	CrUZsida	Thu, 22 September 2005 08:51
	Re: 1JZ-GE questions	ChrisTH	Thu, 22 September 2005 08:58
	Re: 1JZ-GE questions	CrUZsida	Thu, 22 September 2005 09:01
	Re: 1JZ-GE questions	ChrisTH	Thu, 22 September 2005 10:04
	Re: 1JZ-GE questions	CrUZsida	Thu, 22 September 2005 12:56
	Re: 1JZ-GE questions	cambelt	Thu, 22 September 2005 13:13
	Re: 1JZ-GE questions	ChrisTH	Fri, 23 September 2005 05:26
	Re: 1JZ-GE questions	ChrisTH	Fri, 23 September 2005 05:40
	Re: 1JZ-GE questions	ChrisTH	Fri, 23 September 2005 08:02
	Re: 1JZ-GE questions	gianttomato	Fri, 23 September 2005 08:57
	Re: 1JZ-GE questions	ChrisTH	Fri, 23 September 2005 09:03
	Re: 1JZ-GE questions	gianttomato	Fri, 23 September 2005 09:05
	Re: 1JZ-GE questions	ChrisTH	Fri, 23 September 2005 13:08
	Re: 1JZ-GE questions	ChrisTH	Sat, 24 September 2005 05:02
	Re: 1JZ-GE questions	CrUZsida	Sat, 24 September 2005 05:21
	Re: 1JZ-GE questions	CrUZsida	Sat, 24 September 2005 05:23
	Re: 1JZ-GE questions	ChrisTH	Sat, 24 September 2005 06:18
	Re: 1JZ-GE questions	ChrisTH	Sat, 24 September 2005 08:37
	Re: 1JZ-GE questions	ChrisTH	Sun, 25 September 2005 03:36
	Re: 1JZ-GE questions	CrUZsida	Sun, 25 September 2005 14:08
	Re: 1JZ-GE questions	ChrisTH	Sun, 25 September 2005 15:55
	Re: 1JZ-GE questions	CrUZsida	Mon, 26 September 2005 00:38
	Re: 1JZ-GE questions	ChrisTH	Mon, 26 September 2005 11:03
	Re: 1JZ-GE questions	ChrisTH	Mon, 26 September 2005 11:20

Previous Topic:	dry sump kit for the 3sgte
Next Topic:	4ke setup on 3k compared to 4k

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.