Author | Topic |
Registered: June 2002
|
iggte info
|
Tue, 11 February 2003 11:23
|
|
hay guys , i need some help , can any one tell me were i can find info on the 1ggte , like history , production dates , what cars it came in , the break sizes of these cars etc , need this info for enginering ,, also any one had problems wid theres running rich , mine fauling up plugs like a bitch
Dennis
|
|
|
Location: PNG
Registered: June 2002
|
Re: iggte info
|
Wed, 12 February 2003 23:25
|
|
check fuel pressure - sounds like your fuel regulator is possibly faulty
|
|
|
Location: Sydney
Registered: May 2002
|
Re: iggte info
|
Wed, 12 February 2003 23:28
|
|
running rich at idle or on boost? could be a air leak if it's rich on boost, my one went hella rich on bost and has a slightly rough idle, need to find some leaks.
|
|
|
Location: Dandenong/VIC
Registered: May 2002
|
Re: iggte info
|
Thu, 13 February 2003 02:27
|
|
Whats meant by rough idle??
|
|
|
Location: Sydney
Registered: May 2002
|
Re: iggte info
|
Thu, 13 February 2003 03:38
|
|
hunting for the correct idle speed
|
|
|
Location: Dandenong/VIC
Registered: May 2002
|
Re: iggte info
|
Fri, 14 February 2003 20:44
|
|
This off the topic but if I gotta Gen 1 1g-gte would I be able to swap over to a gen 3 engine?
|
|
|
Location: Cabramatta, NSW
Registered: May 2002
|
Re: iggte info
|
Tue, 18 February 2003 00:29
|
|
The mounts and everything should be the same.
If you've got a water to air intercooler, you can swap it onto the Gen 3 (like I have) 'coz it saves you from having to do the plumbing all over again. This would require you to swap one of the rocker covers over, but it's not a hard job. The loom won't have any room for the low water indicator in your i/c though...
The computers are different, so you'll need to rewire...
|
|
|