Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » My ISCV is confused (1ggte)

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
willwal98
Regular


Location:
Toowoomba
Registered:
May 2002
 
My ISCV is confused (1ggte) Sun, 02 October 2005 02:01 Go to previous message
I have been running this engine since last christmas and with very few hasssles (need a new clutch, turbos leak a little) but I have always run it with the ISCV unplugged. This hasn't really been a problem but I would like the idle to increase when the engine is cold to help warm up etc. So today I pulled the ISCV, it's nice and clean BTW, kept it hooked to power and stuck a rubber screw driver in the hole to block it up but allow me to control the air leak so to speak and the ISCV moves in and out as it is supposed to. The problem is it's confused, it seems to idle a little bit low and misjudges the starting.

The engine revs shoot up a bit just after the engine starts and then it stalls out or almost stalls (grumbles a bit but keeps running).

Is there anywhere I can adjust this or would a problem somewhere else cause this? Also is there anyway to adjust the idle on an ISCV enables engine as there is no idle screw on the throttle body (has a plug in the hole where I think it would go.
  Send a private message to this user    

SubjectPosterDate
Read Message   My ISCV is confused (1ggte)  willwal98Sun, 02 October 2005 02:01
Read Message   Re: My ISCV is confused (1ggte) willwal98Tue, 04 October 2005 13:41
Read Message   Re: My ISCV is confused (1ggte) CrUZsidaWed, 05 October 2005 01:03
Read Message   Re: My ISCV is confused (1ggte) justcallmefrankWed, 05 October 2005 01:10
Read Message   Re: My ISCV is confused (1ggte) CrUZsidaWed, 05 October 2005 01:19
Read Message   Re: My ISCV is confused (1ggte) justcallmefrankWed, 05 October 2005 01:23
Read Message   Re: My ISCV is confused (1ggte) willwal98Wed, 05 October 2005 08:57
Read Message   Re: My ISCV is confused (1ggte) sideshowWed, 05 October 2005 10:42
Read Message   Re: My ISCV is confused (1ggte) willwal98Wed, 05 October 2005 23:09
Read Message   Re: My ISCV is confused (1ggte) fOOZ86Thu, 06 October 2005 02:00
Read Message   Re: My ISCV is confused (1ggte) willwal98Thu, 06 October 2005 03:31
Read Message   Re: My ISCV is confused (1ggte) CrUZsidaThu, 06 October 2005 02:04
Previous Topic:ST185 Oxygen Sensors - 1 Wire or 4 Wire???
Next Topic:Need PCD and offset for a KE26

Goto Forum:
-=] Back to Top [=-

Current Time: Fri Feb 7 15:45:37 UTC 2025

Total time taken to generate the page: 0.0044939517974854 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.