Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Toymods » Tech & Conversions » injecters not pulsing

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
syncro
Regular


Location:
ireland
Registered:
October 2004
injecters not pulsing Mon, 03 October 2005 00:51 Go to previous message
i have a uk spec ae86 that will not start.

it was running fine until i disconected the battery to weld some seat rails, i reconnected it when i was finished and used a booster pack as the battery was flat, the car will not start.

i checked all the fuses and they are fine, i put my ecu in a friends car and it is working fine

i looked up the tech docs here for a wiring diagram. i cannot find the solenoid resistor on my car, what does this look like and where would it be? i have spark when cranking and the fuel pump is priming as it should. there is power at both pins on each injecter and there is 12v at pins No.10 and No.20 on the ecu.

any ideas what may be wrong?

[Updated on: Mon, 03 October 2005 01:05]

  Send a private message to this user    

SubjectPosterDate
Read Message   injecters not pulsing  syncroMon, 03 October 2005 00:51
Read Message   Re: injecters not pulsing CrUZsidaMon, 03 October 2005 03:36
Read Message   Re: injecters not pulsing mic*Mon, 03 October 2005 06:42
Read Message   Re: injecters not pulsing CrUZsidaMon, 03 October 2005 06:50
Read Message   Re: injecters not pulsing mic*Mon, 03 October 2005 07:11
Read Message   Re: injecters not pulsing CrUZsidaMon, 03 October 2005 07:23
Read Message   Re: injecters not pulsing syncroMon, 03 October 2005 11:02
Read Message   Re: injecters not pulsing mic*Mon, 03 October 2005 22:34
Read Message   Re: injecters not pulsing wilbo666Tue, 04 October 2005 01:32
Read Message   Re: injecters not pulsing CrUZsidaTue, 04 October 2005 02:55
Read Message   Re: injecters not pulsing wilbo666Tue, 04 October 2005 04:05
Read Message   Re: injecters not pulsing Bill SherwoodTue, 04 October 2005 04:46
Read Message   Re: injecters not pulsing syncroTue, 04 October 2005 12:01
Read Message   Re: injecters not pulsing syncroTue, 04 October 2005 19:46
Previous Topic:Is this definately head gasket ?
Next Topic:jzx90 wiring diagram, where is it?

Goto Forum:
-=] Back to Top [=-

Current Time: Tue Jul 22 00:05:18 UTC 2025

Total time taken to generate the page: 0.0049269199371338 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.