F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Wade 267° in my 18psi 4AGZE - help me with setup please! Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
nick.parker Regular Location: Perth Registered: January 2005	Wade 267° in my 18psi 4AGZE - help me with setup please! Wed, 05 October 2005 00:55 Hi, With the help of a good friend I've installed some Wade 267° cams in my 4AGZE (and replaced the shims that needed it) which is running an 18psi SC14 setup. Firstly the idle is STOCK. I was amazed that it barely changed, a maybe 1 - 2mm of Hg less vaccuum. Anyway I have some adjustable gears and have tried a few different settings, and have generally remembered to fix up the ignition timing each time I change the exhaust cam . With my standard tune, I did some careful driving monitoring lambda on a wideband system. but interestingly my car was too lean at low revs and too rich at higher revs (I haven't been revving past about 4500rpm yet). Would leaner at low rpm be cause by blow though (too much overlap) and richer at high rpm because exhaust is opening too early? Can anyone recommend a good way to setup these cams ( a starting point!) When I corrected these lean and rich situations the power is improved a bit, but I still think the cams aren't right! The car is WAY down on the low end torque it used to have with stock cams, and its not feeling very strong in the mid revs any more either. Regards, Nick [Updated on: Wed, 05 October 2005 00:57] [Report message to a moderator]

	Subject	Poster	Date
	Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 00:55
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 01:48
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	mr2gze	Wed, 05 October 2005 02:38
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	Ben Wilson	Wed, 05 October 2005 01:55
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 02:42
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	Ben Wilson	Wed, 05 October 2005 03:16
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 05:19
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Wed, 05 October 2005 06:35
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	improvedae86	Wed, 05 October 2005 05:58
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	TE72_Turbo	Wed, 05 October 2005 14:07
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	bpt-4w	Wed, 05 October 2005 14:25
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	Ben Wilson	Wed, 05 October 2005 23:23
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Thu, 06 October 2005 02:13
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Thu, 13 October 2005 13:36
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	oldcorollas	Thu, 13 October 2005 14:10
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	myne	Thu, 13 October 2005 22:34
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Fri, 14 October 2005 00:18
	Re: Wade 267° in my 18psi 4AGZE - help me with setup please!	nick.parker	Fri, 14 October 2005 00:23

Previous Topic:	leaking sw20 MR2 T Top???
Next Topic:	GZ20 fuel filter

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.