20v Blacktop still running too rich on acceleration????
Sat, 15 October 2005 09:33
This has got me stumped. My Corolla with a AE111 20v black top is coating the rear bumper with black dots (fuel).
Overall, car is running well, and fuel consumption is normal (over 500k to the tank).
Here is what I have changed/checked;
new sensor
new fuel filter
new plugs
injectors cleaned and checked
no fault codes
throttle position sensor checked and adjusted
timing checked
water and air temp sensors checked
fuel rail and pressure regulator checked
runs to 8000rpm no worries
Its running the standard ECU. I am sure these should not run so rich on acceleratioon (I can see black smoke (fuel)) when I give it a boot ful in first.)
Apart from sending it to a dyno, anyone got any other suggestions for me to check/change?
A tosser from Jap import place where I got the engine from said it could be the fuel (running optimax), the oil (runngin GTX 3), the exhaust is too small (2.25") and the standard airbox is no good. I cant see how any of these could be the problem...