| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
People wanting easy seat conversion in RA2x
|
Tue, 18 February 2003 00:18
|
 |
Wanted to let everyone know of a really easy seat conversion for the RA2x Celicas..
I originally put the Honda Prelude seats in but had lots of problems with the height of them. I managed to cut out some of the padding for the passenger seat and bolted the driver seat directly to the floor with no rails. This gave me enough room but decided it was not practical having a fixed seat.
Anyhows... I had a pair of Nissan Silva seats sitting around. These went in really nicely, very simple conversion! All that was needed was some angle, around 50mm on one side and 30mm on the other, and about 1 meter is required in length.
With this cut and bolted down the side of each seat, some holes drilled for the original Celica rails to bolt on to it, all went into place and with no modifications there is more head room than the Honda seat bolted to the floor.
The seats aren't quite as nice as Honda seats, but give plenty of support..
Cheers,
Joel
|
|
|
