| Author | Topic |
|---|
Location:
Adelaide
Registered:
May 2003
|
|
45mm Trumpets
|
Sat, 05 November 2005 22:08
|
 |
Ok, with the spate of new quad throttle conversions, and new plenums being made up i figure someone will probably want these.
Plain and simple, 45mm trumpets (ill take a photo with the calipers soon), out of T6 alloy, with a seperate base. As they are a seperate base they are cut to length, so can be customised for any length you want (obvously shorter than current length)
Price: $100
Take them off my hands... buy buy buy (/subliminaladvertising)
|
|
|
Location:
Tasmania
Registered:
April 2005
|
|
Re: 45mm Trumpets
|
Sat, 05 November 2005 22:40
|
|
would these fit up to 45mm webers?
thanks mate.
|
|
|
Location:
Adelaide
Registered:
May 2003
|
|
Re: 45mm Trumpets
|
Sun, 06 November 2005 02:18
|
|
Not sure on the boltspacing for 45mm Webers. But they should be able to fit reasonably, possibly with slight modifications.
They were originally for blacktop 20v throttles.
|
|
|
Location:
Canberra
Registered:
July 2005
|
|
Re: 45mm Trumpets
|
Sun, 06 November 2005 05:50
|
|
|
Weber bolt apcings are 65mm, 20v throttles are 73mm. Wouldn't quite fit, but it is massageable!
|
|
|
Location:
Adelaide
Registered:
May 2003
|
|
Re: 45mm Trumpets
|
Sun, 06 November 2005 05:56
|
|
I think 65mm is the same as my 20v Silvertop throttles that i had bored out. Originally i was going to go to 20v Blacktop, and hence bought those, but i wimped out on creating the manifold and bought a set of silvertops and sold the blacktops but kept the throttles.
Let me go measure them up.
|
|
|
Location:
Adelaide
Registered:
May 2003
|
|
Re: 45mm Trumpets
|
Sun, 06 November 2005 05:59
|
|
Ok just measured them up. 65mm looks quite managable actually, should fit with very few issues so far as i can see. They are actually 46mm ID too, out by one errors 
|
|
|
Location:
Adelaide
Registered:
May 2003
|
|
Re: 45mm Trumpets
|
Mon, 07 November 2005 06:19
|
|
|
Bumparoosies.
|
|
|
I Supported Toymods
Location:
Glenmore Park, NSW
Registered:
March 2004
|
|
Re: 45mm Trumpets
|
Tue, 08 November 2005 21:30
|
|
so bolt spacing on these is 73mm?
as in dead centre of bolt hole to the other yeah?
if so .... '/scratches chin' interesting.
|
|
|
I Supported Toymods
Location:
Glenmore Park, NSW
Registered:
March 2004
|
|
|
Location:
Adelaide
Registered:
May 2003
|
|
Re: 45mm Trumpets
|
Wed, 09 November 2005 05:02
|
|
From memory yeah, actually from the edge of one to the same edge of the other... which is equivalent anyway.
Im not near them atm, so i cant check.
|
|
|
Location:
Adelaide
Registered:
May 2003
|
|
Re: 45mm Trumpets
|
Thu, 10 November 2005 08:17
|
|
|
Bumpzor
|
|
|
