| Author | Topic |
|---|
Location:
Ballarat
Registered:
September 2003
|
|
Starting problems: 2t AND 3sge :x
|
Sun, 20 November 2005 12:17
|
 |
Hey guys,
after trying for so long, ive finally decided to yield and ask on here, hopefully someone can give me some direction...
1st of all: I have a 3sge, that sometimes decides to not start, i just get the 'click' of the starter, and it can take 5 clicks, sometimes an hour to start. We took the starter motor off, cleaned and levelled the points, checked the bushings, solunoid (spelling?) and it all looked fine/works fine with a battery. it still does the problem, GRRR! bought another starter motor, STILL DOES IT! What else should i check? What wiring? It is getting the 'click' just nothing else.
Also have a 2T that WAS running and starting fine. I went to start it after a few months of no use, and the starter didnt kick in! Except this one just spins, i can hear it going 'zzzz' but just doesnt throw in. i thought the shaft may have seized up; pulled it off, oiled it up, shaft had good movement, put it on...'zzzzz', it still spins. What should i check there? What should i look at fixing? im sick of buying starter motors
thanks for any help/info
|
|
|
