| Author | Topic |
|---|
Location:
sunny coast, qld
Registered:
October 2002
|
|
Installing MV autos shift box
|
Thu, 24 November 2005 14:23
|
 |
Did a search and found nothing.
Has anyone on here installed one?
I have found the 1jz auto wiring diagram here. http://www.1jz-gte.us/documents/SubDocs1/1JZWiring ECT.pdf
Except this is going to an ECT. Mine from a jzx90 chaser goes straight to the regular ECU. So anyway on page 5 there is the bit about the gear selection wires. I think I have found the A plug that is round with 6 wires in it but the colours are wrong. I am 99% sure that this is the plug that I have to use but I just need that bit of confirmation before I go chopping things 
I need to get the L, 2 and D wires from there.
Still need to find OD wire which looks to be at K on the diagram but I couldn't see any plugs that look like that.
Then I have to find Solenoid A and Solenoid B which I have no clue what they are on the wiring diagram as I thought the solenoids were used to change the gears so that would be L,2,D etc.
So if anyone can help me on this, that would be great.
Chris
|
|
|
