| Author | Topic |
|---|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Attn: 1GGTE owners
|
Fri, 07 March 2003 02:26
|
 |
Okie doke,
Where do the vacuum lines that come from the side of the inlet manifold go to?
Mine have been broken or have come losse during the freighting of them over here.
Can anyone please tell me where I have to put the new ones?
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: Attn: 1GGTE owners
|
Fri, 07 March 2003 06:15
|
|
|
big one to the fuel pressure reg, one small one is blocked another goes to the p/s pump and the other one goes to the heater solenoid so you need to block that aswell. I have them all blocked except one goes to the fuel pressure reg and noe goes to a boost guage
|
|
|
I supported Toymods
Location:
Perth
Registered:
May 2002
|
|
Re: Attn: 1GGTE owners
|
Fri, 07 March 2003 12:02
|
|
What do you mean by "big" one?  Obviously my engine is about 25km away, so I'm trying to work off some of my pictures 
|
|
|
Location:
Sydney
Registered:
May 2002
|
|
Re: Attn: 1GGTE owners
|
Fri, 07 March 2003 15:34
|
|
there will be roughly 3 1/4inch tee off lines and 1 say.. 3/8 tee off.
the 3/8 goes to the fuel pressure reg whcich should be intact considering it's only a 1 inch line.
|
|
|
