| Author | Topic |
|---|
Membership Secretary
Location:
Sydney
Registered:
June 2002
|
|
Surge Tank / Fuel pump questions
|
Mon, 24 March 2003 09:38
|
 |
G'day all,
I've been offered at the right price all the EFI gear from a 4ME. The inlet manifold, fuel rail, computer etc, and was hoping to bolt up to my 4MU in the crown. It will bolt straight up. its just the matter of converting a carby car to a EFI.
I know I've got to put a surge tank and fuel pumps in.
My questions are,
Just to ask for general knowledge on the topic.
(all info is helpful.)
Where to get a surge tank and fuel pumps?
How much am I going to pay?
If it is a bastard to put in, who can I pay to do it?
(and they'll do a good job)
All this keeping in mind that eventually I am going to put a 7MGTE if not a 1JZGTE or 2JZGTE. So I would like to do the job properly the first time. i.e. over kill for the worn 4M but adequate for the other donks. Unless I can get away with it very cheaply and say use a later model crown pump etc etc,
Any response from ppl that have done this would be greatly appreciated.
Thanks
the Stitt
|
|
|
