| Author | Topic |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Re: 1UZ INTO MA61
|
Mon, 14 April 2003 03:28
 
|
 |
Ah yeah it is hydrollic instead of electrical. Where does the hydrolic pump sit? is it on the fan belt or what? Its not the same lines as the PS pump is it?
Twin thermos sounds good. This morning I actually disconnected my two little fans that were with my old engine for the aircon. As I thought it was doing funy things to my electronics. Car got hot on the way to work though, so I'll be connecting them up again tonight. Also found another electrical fan between intercooler and aircon cooler, I'll have to find the wires for that and hook it up too, might help a little.
At the moment I'm running a DC12 (or a DC16? which is the big brother of the DC32?) Davies craig thermo, and the twin small stock fans on my MA70 radiator. I think the radiator is too small, as the Soarer one is much wider, but it is thinner, so I'm gonna try for more airflow with my MA70 radiator.
Biased's twin thermo setup is tops. Look it up on another thread as theres pics there too.
Have fun with the flywheel! I changed my 7M flywheel to adapt onto the 1U. Had to get new screw holes cut out, ringear shrunk on, and the whole thing balanced. Its a full blown racing flywheel & excellent clutch (also on different thread is clutch details).
If your planning to do much with the engine then look at putting in a better clutch before you start as even "heavy" clutches will slip with that much power.
|
|
|
