| Author | Topic |
|---|
Location:
Sydney
Registered:
November 2002
|
|
Re: AE92 - 4-AFE Cool Air Induction Options - Please Help
|
Mon, 14 April 2003 16:46
|
 |
Hi and welcome!
I've done #1 to my AE102 7A-FE and also did #2 to an EG5 ('92 Honda Civic Si)..dodgy style with lots of duct taping 
For my setup I also increased the size of the intake piping from the top of the airbox to the throttle body, tapering from 80mm back down to 60mm or so. I also put a big scoop from the bumper going into the bottom of the airbox. Oh and I also put a few little holes in the bottom of the airbox.
The #1 setup on my car has had better gains than the civic. Also, when it's cold outside you can REALLY tell a big difference.
I think the AE92 4A-FE and AE102 7A-FE setups can't be all that different. I'll email you the details and results (yes very subjective) soon.
I just found this link which is the PROPER way to do #2 (ie not w/ old pipes and duct tape like I did).
http://www.maxima.org/shoptalk/sub_modifications/m od_cai/index.shtml
Good luck.
Paul
BTW i THINK u can click "subscribe to this thread" and replies/etc will be auto-emailed to u.
|
|
|
