| Author | Topic |
|---|
Location:
Sydney
Registered:
July 2002
|
|
Re: 1UZ INTO MA61
|
Mon, 14 April 2003 23:11
 
|
 |
| biased99 wrote on Tue, 15 April 2003 08:55 |
Frankly, I have no idea! (If I hook my temp sender up, my gauge goes straight to the top and stays there...Need to (A) Extract old sender and (B) install new one... 
Having said that, the car seems to runs quite cool in driving, and I only notice the fans coming on when the car is idling stationary...They'll cycle on for a few minutes then cycle off (when the temp drops to 85 degrees - Or at least that's the way the Autronic has been setup to cycle them! 
|
Thats pretty good temperature. Not good about having no temp guage though. My temp guage is the standard 7M one (digital), and I found a temp sensor on the engine that puts out the same signal, so I hooked it up, and it works same as the last one.
I'm gonna have a look at a bigger/better radiator this afternoon as even going along the highway at 100k's the wire to the fan blew, and it got "warm"! so theres definately not enough airflow in a MA70 supra. Need to rely on the fans to push more air. Although I still (stubornly) havn't taken out the intercooler yet.
|
|
|
