yes yes, im giving this one to shane as i figured i dont really want it anymore, and well, he could prolly do with it for the 3s....
old corollas - the orginal was just a stocker 7m 60mm unit. this one is a twin 57mm plate design, from a 2001 Mustang Cobra 4.6L (about 302hp?). I bought it off EBay for about AUD$80 landed from california. Its being used with an early 7mge intake plenum from 1986/87 NA supras (only this model).
the originalthrottle body connects to a Y pipe, which obviously divides before hitting the plenum in two places. it 'should' just be a simple case of lopping the Y pipe in half width wise (so there's basically 2 bits of pipe sticking out from the plenum) and welding a throttle body base plate to these arms... then bolt the new t/b to that base plate...
not sure exactly how flow will be effected at small openings, so im designing a log or sine rising rate throttle cable cam to give me some throttle control
Wed, 16 April 2003 14:16
