Author | Topic |

Location: Kita-Ku, Sapporo, Japan
Registered: January 2003
|
Re: Polishing alloy engine parts/components
|
Fri, 18 April 2003 06:07

|
 |
hey ppl,
i can definitely recommend some 3M products. i used them for combustion chamber shaping and then polishing. the hard one removes metal easily but controllably, and the soft/fine one doesn't remove much metal but brings up a close to mirror finish. much much much better than starting with any kind of sandpaper..
only problem is i don't know where to get it yet apart from Qantas
the discs are 25x6x3 for the soft one and number on it is EXL-2S-FN, light grey in colour, the hard one is 25x3x3 and number is EXL-6A-MED, and brown in colour. i'll try to post a pic if anyone is interested. they will save you hours of finger numbing work, i guarantee it (and no, i don't work for 3M, was just so impressed when i used the darn things)
Cya, Stewart
|
|
|
| Subject | Poster | Date |
 |
Polishing alloy engine parts/components
|
SUPRA MAN | Wed, 16 April 2003 15:31 |
 |
Re: Polishing alloy engine parts/components
|
mr supra | Wed, 16 April 2003 22:01 |
 |
Re: Polishing alloy engine parts/components
|
wilbo666 | Thu, 17 April 2003 00:16 |
 |
Re: Polishing alloy engine parts/components
|
Danners | Thu, 17 April 2003 00:21 |
 |
Re: Polishing alloy engine parts/components
|
SUPRA MAN | Thu, 17 April 2003 00:45 |
 |
Re: Polishing alloy engine parts/components
|
wilbo666 | Thu, 17 April 2003 16:27 |
 |
Re: Polishing alloy engine parts/components
|
gianttomato | Fri, 18 April 2003 03:30 |
 |
Re: Polishing alloy engine parts/components
|
oldcorollas | Fri, 18 April 2003 06:07 |
 |
Re: Polishing alloy engine parts/components
|
oldcorollas | Fri, 18 April 2003 06:21 |
 |
Re: Polishing alloy engine parts/components
|
oldcorollas | Fri, 18 April 2003 06:38 |
 |
Re: Polishing alloy engine parts/components
|
SUPRA MAN | Fri, 18 April 2003 06:41 |
 |
Re: Polishing alloy engine parts/components
|
oldcorollas | Fri, 18 April 2003 06:53 |
 |
Re: Polishing alloy engine parts/components
|
IRA11Y | Fri, 18 April 2003 07:11 |