| Author | Topic |
|---|
Location:
Brisbane
Registered:
December 2002
|
|
Re: 18 rgu tech questions
|
Sun, 20 April 2003 23:03
 
|
 |
Just to let you know I, I am getting an 18rgeu ready to replace an 18RC. The new engine has an electronic dizzy so I thought I might as well swap it into the 18RC and see how it goes. Will I'll tell you it is not a straight swap. The tightening bolt on the adjuster is about 5mm out. I did not try it the other way around, but why would I seeing I already have the electronic dizzy? Just a thought.
One more thing. the electronic dizzy's adjusting arm is a part of the housing of the dizzy as the 18rc's has the clamp type. this might have caused the problem I had. But it never hurts to try. (unless you put it in 180 degrees) BIG BACK FIRE!! 
|
|
|
| | Subject | Poster | Date |
|---|
 |
18 rgu tech questions
|
Mr DOHC | Sun, 20 April 2003 10:33 |
|
Re: 18 rgu tech questions
|
Kergen-RA28 | Sun, 20 April 2003 11:59 |
|
Re: 18 rgu tech questions
|
Blaze | Sun, 20 April 2003 23:03 |
|
Re: 18 rgu tech questions
|
celicaboy | Mon, 21 April 2003 10:34 |
|
Re: 18 rgu tech questions
|
Blaze | Mon, 21 April 2003 22:09 |
|
Re: 18 rgu tech questions
|
THE WITZL | Tue, 22 April 2003 01:44 |
|
Re: 18 rgu tech questions
|
Kergen-RA28 | Tue, 22 April 2003 10:04 |
|
Re: 18 rgu tech questions
|
celicaboy | Wed, 23 April 2003 12:07 |
|
Re: 18 rgu tech questions
|
Steve M | Thu, 19 June 2003 04:51 |
|
Re: 18 rgu tech questions
|
THE WITZL | Thu, 19 June 2003 11:44 |
|
Re: 18 rgu tech questions
|
M.W.P. | Thu, 19 June 2003 13:53 |
|
Re: 18 rgu tech questions
|
Steve M | Fri, 20 June 2003 03:19 |
|
Re: 18 rgu tech questions
|
THE WITZL | Fri, 20 June 2003 03:38 |
|
Re: 18 rgu tech questions
|
Blaze | Fri, 20 June 2003 06:31 |
|
Re: 18 rgu tech questions
|
YelloRolla | Fri, 20 June 2003 07:29 |
|
Re: 18 rgu tech questions
|
Steve M | Mon, 23 June 2003 17:11 |
